Electromagnetic Induction Heating Equipment-DW-UHF-60

  • Electromagnetic Induction Heating Equipment-DW-UHF-60

Electromagnetic inductioin heating equipment is used to braze,harden and heat treatment surface.

Main specifications

Maximum input power: 60KW
Oscillating frequency: 30-150KHz
Maximum input current: 90A
Heating current: 15-145A
Input voltage: 3phases 380VAC, 50 or 60Hz
Duty cycle: 100%
Cooling water: ≥0.2Mpa 10L/min
Auto heating time: 0.1-99.9seconds
Auto retaining time: 0.1-99.9seconds
Auto cooling time: 0.1-99.9seconds
Generator size: 680X370X640mm
Transformer size: 530X330X480mm
Packing weight: 120KG

Main characteristics

1.With high frequency up to 150KHZ , and very thin and tiny parts can be easily heated.
2.IGBT and current inverting technologies have been used; higher reliability and lower maintenace cost.
3.100% duty cycle, continuous working is allowed at maximum power output.
4.Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
5.Display of heating power and heating current and oscillating frequency.
6.Simple to install , installation can be done by unprofessional person very easily;
7.Light weight, small size;
8.different shape and size of induction coil can be changed easily to heat different parts.

9.Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.

Main applications:

Quenching of shaft
Quenching of gear
Brazing of copper bars
Heating of bullet shell
Floating melt with water cooled crucible
Annealing of wire continuously

Electromagnetic induction brazing heater